Many colors and a wide selection of finishing ch profiles for the perfect look trim. Minimal maintenance without surface treatment. Simple, quick and dry installation. Good thermal insulation properties. Long life and high resistance to frost and UV radiation. Facing floorboards with a tongue and groove for easy and quick installation. It is mainly used for lining ceilings, roof, gables and entire facades, but also in the interior. Poultice is very useful also in dusty and humid areas. Lining is easily combinable with insulation systems. Thanks so. Chimney effect resolves problems with damp masonry Guidelines on the use of plastic planks: Installation of the outer cladding be in view of the fragility of the material is not recommended at temperatures of + 5 ° C or lower. There is a danger of damaging the material during assembly. When installing horizontal edge profiles on the bottom surfaces we recommend always be concealed in the bottom of the bottom of these profiles to drill drain holes so as to provide the best drainage of water through these profiles. Dark tiles, for example. Dark wood is not suitable to use in places where they are exposed to direct sunlight, which due to the high emissivity heat can be milked t deformation dark tiles. This damage can not be applied complaint. For other colors may be due to direct sunlight cause 15% discoloration tiles (this does not apply to the facing panels Renolite foil). Distortions tiles for reasons of high emissivity heat can be prevented by installing the mounting clips (free movement of blades) and ventilation profiles that should be used at the top and bottom for better ventilation of overheated air.